Introduction
ROCK R3 Pro
-
Introduction to the R3 Pro (12:28)
-
A-Z Walkthrough: Overview (17:07)
-
Setting-Up the Base Station (0:53)
-
Emlid Base Station Settings (0:48)
-
Using Ground Control Points (GCPs) for Optimal LiDAR Data
-
DJI M300/M350 Damping Assembly Guide
-
Setting-Up the DJI M300-M350 (1:45)
-
Installing the R3 Pro on DJI M300-M350 (4:32)
-
Mission Plan Preparation (0:54)
-
Mission Planning (9:25)
-
Powering on the R3 Pro (0:22)
-
LiDAR Calibration Guide (12:08)
-
Stop Collecting and Get Ready for ROCK Desktop (0:16)
-
Operating the ROCK Pilot App (4:50)
RTK and GCPs
ROCK Desktop
-
Introduction to ROCK Desktop (2:53)
-
A - Z Walkthrough: Overview (30:04)
-
Set-Up and Activation (1:17)
-
Computer Specs and Requirements (0:32)
-
Retrieving Processing Data (0:29)
-
Updating Software & Initiating Point Cloud Processing (1:16)
-
Sensor Profile (2:07)
-
Setting Base Station Location (1:32)
-
Selecting Flight Lines (2:10)
-
Angle Gate "FOV" (2:45)
-
Range Gate "Distance" (3:46)
-
Reviewing Data in the Field (0:17)
-
Camera Calibration (11:48)
-
GCP Alignment Tool (SLAM) (3:32)
ROCK SLAM
-
Introduction to ROCK SLAM (0:05)
-
A-Z Walkthrough: Overview (15:24)
-
Installing R3 Pro ROCK SLAM (1:47)
-
Capturing: Best Practices (1:56)
-
Operating the R3 Pro with the Power Button (0:46)
-
Pro Tip: Capturing Stairs (1:17)
-
Pro Tip: Going Into Rooms (1:00)
-
Generating a ROCK SLAM Point Cloud (2:04)
-
Reviewing the ROCK SLAM Data (3:22)
-
The Future of ROCK SLAM (2:38)
ROCK Mobile Mount
ROCK Cloud
-
Introduction to ROCK Cloud (3:32)
-
Processing LiDAR Data: Starting a New Project (48:38)
-
Navigating & Analyzing the Data (13:00)
-
Data QC/QA & Alignment (GCPs) (8:42)
-
Generating Deliverables (ROCK Surveyor) (3:26)
-
Analyzing Deliverables (ROCK Surveyor) (7:02)
-
Mastering Stockpile Volumetrics (2:51)
-
Exploring Planimetrics (Linework) (3:00)
-
Custom Planimetric Symbols
-
Adding Breaklines
